Common mechanical faults of nitrogen compressors

Time:2020-09-21 09:11:30 Source: UNIGY View: 848
  • Nitrogen compressors can be divided into many types based on their functions and specifications. We have previously learned about some information and characteristics of nitrogen compressors, and the answer is inevitable. So, what kind of faults usually occur in nitrogen compressors? Let's take a look today.
  • 氮气压缩机能够分为很多种类,根据不同的功能,不同的规格,能分为很多的类型,我们之前了解了有关氮气压缩机的一些信息以及特点,那么对于氮气压缩机来讲是不是也会出现一些故障呢,答案是必然的,那么一般氮气压缩机都会出现什么样的故障呢,我们今天就来了解一下。
  • The main forms of mechanical faults in nitrogen compressors include wear, deformation, and fracture, and the specific reasons generally need to be analyzed after the nitrogen compressor is disassembled to determine. Wear and tear faults are generally common in nitrogen compressors that have been running for a long time. The noise during operation exceeds the normal value, but it does not appear very sharp or intermittently, and is accompanied by an increase in body temperature. Wear and tear are caused by the need to replace the nitrogen compressor in a timely manner after it has been running for a long time, otherwise it may cause cylinder wear and tear.
  • 氮气压缩机机械故障主要形式有:磨损、变形、断裂,具体原因一般需要对氮气压缩机解刨后分析才能确定。磨损故障一般常见于较长时间运行的氮气压缩机,运行时的噪声超过正常值,但不会很尖锐或间歇出现,并伴有机身温度升高,磨损是由于氮气压缩机运行时间长后,需要及时更换,否则可能造成气缸磨损。
  • When the noise of the nitrogen compressor is particularly high and there is a piercing scream, it is likely that the internal mechanical components, such as the main shaft, bearings, etc., have deformed or damaged. The sound is caused by friction between the damaged components and the shell, and the body shell is accompanied by vibration. The reasons for such failures are not only due to the design defects of the equipment itself, but also due to long-term operation under unsatisfactory conditions, or frequent startup and shutdown, resulting in excessive load. When there is a damage fault, it is necessary to replace the nitrogen compressor in a timely manner. If conditions permit, it is best to perform a thorough analysis to identify the exact cause and avoid the recurrence of such faults.
  • 当氮气压缩机噪声特别高,并有刺耳的尖叫声,很可能是内部机械部件,如主轴、轴承等部件发生变形或破损,声音是由于破损部件与壳体摩擦发生,机身壳体伴有振动。造成此类故障的原因除设备自身的设计缺陷外,更多是因为长期在不理想的工况下运行导致,或是频繁启停,负荷过大。出现破损故障时需要及时更换新氮气压缩机,有条件的情况下最好做解刨处理,分析出准确原因,避免此类故障再次出现。
  • So we must regularly maintain and maintain our equipment in order to extend its service life and reduce the frequency of equipment failures.
  • 所以我们一定要对我们的设备定期进行设备的维护以及保养,才能延长设备的使用寿命,并且减少设备出故障的频率。
  • Unigy provides customers with industrial equipment such as screw air compressors, oil-free compressors, nitrogen compressors, sulfur hexafluoride (SF6) compressors, helium compressors, medium and high pressure air compressors. We not only provide customers with air compressors, but also provide solutions for oil-free compressed gas systems.
  • 优尼捷为客户提供螺杆空压机,无油压缩机,氮气压缩机,六氟化硫(sf6)压缩机,氦气压缩机,中高压空气压缩机等工业设备,我们不止为客户提供空压机,更为客户提供无油压缩气体系统解决方案。