Gas recovery compressor-HS1-1200

  • UNIGY gas recovery compressor is based on a modular design, which can realize Stage-1 compression, Stage-2 compression and Stage-3 compression. It is suitable for the combination of the same crankcase and various cylinders. It is applied into process gas compression, which is an oil-free lubrication compression, including different media. 

    It is applicable to the compression of SF6, helium, nitrogen, biogas, propylene, tail gas, bradenhead gas, coal gas, coalbed methane, methyl chloride, ethylene, LNG, butadiene, R22 refrigerant, ethane, butane, liquefied gas and so on.

Flow rate

o.1-3m3/min

Stress

15-30Mpa

Power

2-30kw

  • UNIGY gas recovery compressor is based on a modular design, which can realize Stage-1 compression, Stage-2 compression and Stage-3 compression. It is suitable for the combination of the same crankcase and various cylinders. It is applied into process gas compression, which is an oil-free lubrication compression, including different media. 

    It is applicable to the compression of SF6, helium, nitrogen, biogas, propylene, tail gas, bradenhead gas, coal gas, coalbed methane, methyl chloride, ethylene, LNG, butadiene, R22 refrigerant, ethane, butane, liquefied gas and so on.
  • UNIGY gas recovery compressor is applied in the following industries:

    Environmental protection

    Special projects

    Petrochemical industry

    Chemical industry

    Food and beverage

    Machinery manufacturing

    Raw material industry

  • UNIGY gas recovery compressor is applicable to the compression of SF6, helium, nitrogen, biogas, propylene, tail gas, bradenhead gas, coal gas, coalbed methane, methyl chloride, ethylene, LNG, butadiene, R22 refrigerant, ethane, butane, liquefied gas and so on.

    No additional filter is required at the back end of 100% oil-free and pure compressed air.

    Air-cooled or water-cooled gas recovery compressor

    Low maintenance cost

    High efficiency

    Modern appearance design
  • Exhaust: 2 - 120 m3/h 

    Pressure: 2 - 25 Mpa

-Air-cooled

-Water-cooled